This is the latest (main) BeagleBoard documentation. If you are looking for stable releases, use the drop-down menu on the bottom-left and select the desired version.

Function rc_i2c_send_byte

Function Documentation

int rc_i2c_send_byte(int bus, uint8_t data)

Sends exactly user-defined data without prepending a register address.

Instead of automatically sending a device address before the data which is typical for reading/writing registers, the rc_i2c_send_bytes function send only the data given by the data argument. This is useful for more complicated IO such as uploading firmware to a device.

Parameters

  • bus – [in] The bus

  • data – [in] The data

Returns

0 on success or -1 on failure