This is the latest (main) BeagleBoard documentation. If you are looking for stable releases, use the drop-down menu on the bottom-left and select the desired version.

Introduction

BeagleV®-Fire is a revolutionary SBC powered by the Microchip’s PolarFire® MPFS025T FCVG484E 5x core RISC-V System on Chip (SoC) with FPGA fabric. BeagleV®-Fire opens up new horizons for developers, tinkerers, and the open-source community to explore the vast potential of RISC-V architecture and FPGA technology. It has the same P8 & P9 cape header pins as BeagleBone Black allowing you to stack your favourite BeagleBone cape on top to expand it’s capability. Built around the powerful and energy-efficient RISC-V instruction set architecture (ISA) along with its versatile FPGA fabric, BeagleV®-Fire SBC offers unparalleled opportunities for developers, hobbyists, and researchers to explore and experiment with RISC-V technology.

BeagleV-Fire front BeagleV-Fire back

Detailed overview

Table 70 BeagleV-Fire features

Feature

Description

Processor

MPFS025T-FCVG484E

Memory

2GB (1Gb x 16)- 1866MHz 3733Mbps, LPDDR4

Storage

Kingston 16GB eMMC

Wireless

1x M.2 Key E, support 2.4GHz/5GHz WiFi module

Ethernet

  • PHY: Realtek RTL8211F-VD-CG Gigabit Ethernet phy

  • Connector: integrated magnetics RJ-45

USB C

  • Connectivity: Flash/programming support

  • Power: Input: 5V @ 3A

Other connectors

  • 1x SYZYGY High speed connector

  • microSD card slot

  • CSI connector compatible with BeagleBone AI-64, BeagleV-Ahead, Raspberry Pi Zero / CM4 (22-pin)

Board components location

This section describes the key components on the board, their location and function.

Front components location

BeagleV-Fire board front components location

Fig. 227 BeagleV-Fire board front components location

Table 71 BeagleV-Fire board front components location

Feature

Description

Power LED

Power (Board ON) indicator

JTAG (MPFS025T)

MPFS025T SoC JTAG debug port

RTL8211F

Gigabit IEEE 802.11 Ethernet PHY

P8 & P9 cape header

Expansion headers for BeagleBone capes.

2GB RAM

2GB (1Gb x 16)- 1866MHz 3733Mbps, LPDDR4

16GB eMMC

Kingston 16GB eMMC Flash storage

CSI

22pin MIPI Camera connectors

M.2 Key E

PCIE M.2 Key E connector

UART debug header

6 pin UART debug header

Reset button

Press to reset BeagleV-Fire board (MPFS025T SoC)

User button

User defined (custom) action button

User LEDs

12x user programmabkle LEDs to show various board status during boot.

GigaBit Ethernet

1Gb/s Wired internet connectivity

Barrel jack

Power input

USB C

Power, connectivity, and board flashing.

Back components location

BeagleV-Fire board back components location

Fig. 228 BeagleV-Fire board back components location

Table 72 BeagleV-Fire board back components location

Feature

Description

microSD

microSD card slot

SYZYGY

SYZYGY High speed connector