This is the latest (main) BeagleBoard documentation. If you are looking for stable releases, use the drop-down menu on the bottom-left and select the desired version.

Function rc_gpio_set_value

Function Documentation

int rc_gpio_set_value(int chip, int pin, int value)

Sets the value of a GPIO pin when in output mode.

must call rc_gpio_init with the OUTPUT flag first.

Parameters

  • chip – [in] The chip number, /dev/gpiochipX

  • pin – [in] The pin ID

  • value – [in] 0 for off (inactive), nonzero for on (active)

Returns

0 on success or -1 on failure